cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1293
Views
0
Helpful
4
Replies
Highlighted
Beginner

How to reset a Nexus 1110-s to factory default

I have a nexus 1110-s with a single VSM.  I need to know how to reset it to factory default so I can reconfigure it as if it was new.

 

Thanks

4 REPLIES 4
Highlighted
Cisco Employee

Do you want to delete only the VSM or the config on the N1110 itself?

If its the latter, you can do a 'erase startup-config' like you do on a router/switch. Now reboot the N1110 and it would restart prompting you to input the details about the domain id,hostname,control vlan etc..

Thanks,
Karthic

Highlighted

I have de same problem. But i tried the same solution but i can not set "erase startup-config" becaso the erase commadn doesnt exit. Someone now how can i do the reset fatory?

Highlighted
Cisco Employee

Hi,

You can do a 

cimc# connect host
1010# write erase
Warning: This command will erase the startup-configuration.
Do you wish to proceed anyway? (y/n)  [n]

or, reimage the device using the installer CD.

HTH,

Joe

Highlighted

Thanks Joe,

 

i check the command, it works fine.

This widget could not be displayed.