layer 3 config design on Nexus 5500 with Fabric Path

[banalas_2]

I trying to Network deisgn for new data Center ,  i am new to DataCenter desgin, i attached the network diagram

i would like to know if can configure my layer3 on 5500 and configure Fabric path to uplink switch

please help give your suggestions on this design 

[Reza Sharifi]

You can configure layer-3 on the 5500 series, but you need to install a daughter cards in each 5500.

See this link:

Layer 3 Daughter Card and Expansion Module Options for Cisco Nexus 5548P, 5548UP, 5596UP, and 5596T Switches

http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/data_sheet_c78-618603.html

HTH