cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3505
Views
5
Helpful
2
Replies

N5K-C5548UP-FA and N55-DL2

Hello , in order to prepar spare parts , i list the needed parts requested for a particular network devices list .

With Nexus N5K-C5548UP-FA , a module N55-DL2 is present on the device , but i do not find any part reference on the CCO .

After some seach i found only the layer3 module is are labeled with a PID and the lyer2 ( n55-dl2) is not labelled .

So as the L3 module is plugged by removing the l2 module , does that means the l2 module is the default module ? and is delivered with the chassis by default ?

Is someone can confirm ?

Rgds.

Hubert.

1 Accepted Solution

Accepted Solutions

Prashanth Krishnappa
Cisco Employee
Cisco Employee

Hello Hubert..

You are correct.. N55-DL2 is default module unless you have a L3 module

Thanks

-Prashanth

View solution in original post

2 Replies 2

Prashanth Krishnappa
Cisco Employee
Cisco Employee

Hello Hubert..

You are correct.. N55-DL2 is default module unless you have a L3 module

Thanks

-Prashanth

Hi Prashanth , than you very much for your clarification . Have a nice day .

Rgds.

Hubert.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: