Nexus 1000v; VSD (Virtual Service Domain) config missing

[rapik]

hello everybody.

 according to the doc

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_x/security_config/b_Cisco_N1KV_VMware_Security_Config_5x/b_Cisco_N1KV_VMware_Security_Config_5x_chapter_011.html

 there should be a VSD feature.

 but i cannot find any commands mentioned the doc

nexus-vsm(config-port-prof)# v?

  vmware    VMware configuration

  vservice  Bind vservice to port-profile

nexus-vsm(config-port-prof)#

nexus-vsm(config-port-prof)# virtual-service-domain test

                              ^

No token match at '^' marker.

nexus-vsm(config-port-prof)#

 has any body familar with VSD?

[Manish Gogna]

This feature was introduced in 4.0(4)SV1(2) , so please ensure that you are running this or a higher version and also can you please share screenshot of all the config steps that you attempt including the ones for VLAN.

Manish

[rapik]

hi Manish thank you for your answer. pls find attached show tech-sup and the missing show and config commands at the end of this log.

[Manish Gogna]

Was the config as per the following attempted?

switch# config terminal
switch(config)# port-profile webserver-inside
switch(config-port-profile)# switchport mode trunk
switch(config-port-profile)# switchport trunk allowed vlan all
switch(config-port-profile)# virtual-service-domain vsd1-webserver
switch(config-port-prof)# no shutdown
switch(config-port-prof)# vmware port-group webservers-inside-protected 
switch(config-port-prof)# service-port inside default-action forward 
switch(config-port-prof)# state enabled
switch(config-port-prof)# show virtual-service-domain vsd1-webserver

[rapik]

Manish,

 the issue is there is NO any vitual-service-domain commands in the Nexus CLI.

 you can try it by yourself

 ssh://212.42.193.5  admin/admin123#

[Manish Gogna]

Hi,

Yes, i tried and faced the same issue, the command did not work. Any chance of testing it on a different NX-OS version by upgrading or downgrading it?

Manish

[rapik]

it's the latest and the only one which supports esxi 6.5

[Kirk J · Accepted solution]

Please note: http://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/5_2_1_s_v_3_1_1/release/notes/n1000v_rn.html

Virtual Service Domain (VSD)VSD is no longer supported as of this release. You must remove the VSD feature before upgrading to Release 5.2(1)SV3(1.1)

Thanks,

Kirk...

[Manish Gogna]

Thanks for solving the mystery Kirk :)

Manish

[rapik]

Hi Manish,

 any comments? have you managed to access the nexus in my lab?