Hello,
We have some trouble for getting up a new Nexus 2232 TM with our existing N5K (5010) with following image: n5000-uk9.5.0.2.N1.1.bin
here's my N5K current config regarding the connection between N5K & N2K:
version 5.0(2)N1(1)
feature telnet
no feature ssh
cfs eth distribute
feature interface-vlan
feature lacp
feature vpc
feature lldp
feature fex
...
fex 103
pinning max-links 1
description "2KSRV02"
...
interface port-channel103
description FEX Server 2
switchport mode fex-fabric
fex associate 103
...
interface Ethernet1/9
description FEX Server 2 PO103
fex associate 103
switchport mode fex-fabric
channel-group 103
interface Ethernet1/10
description FEX Server 2 PO103
fex associate 103
switchport mode fex-fabric
channel-group 103
When we connect the new 2232TM nexus we got this message:
Nexus5010_1# sh fex 103 det
FEX: 103 Description: 2KSRV02 state: Image Download
FEX version: 5.0(3)N2(1) [Switch version: 5.0(2)N1(1)]
FEX Interim version: 5.0(3)N2(0.241)
Switch Interim version: 5.0(2)N1(1)
Module Sw Gen: 21 [Switch Sw Gen: 21]
post level: complete
pinning-mode: static Max-links: 1
Fabric port for control traffic: Eth1/10
Fabric interface state:
Po103 - Interface Up. State: Active
Eth1/9 - Interface Up. State: Active
Eth1/10 - Interface Up. State: Active
Fex Port State Fabric Port
Logs:
11/10/2011 14:57:04.313899: Requesting satellite to download image
11/10/2011 14:57:52.858138: Module register received
11/10/2011 14:57:52.858783: Registration response sent
11/10/2011 14:57:52.859088: Requesting satellite to download image
11/10/2011 14:58:35.155627: Module register received
11/10/2011 14:58:35.156253: Registration response sent
11/10/2011 14:58:35.156576: Requesting satellite to download image
....
This goes on repeatedly.
I think there's maybe an issue with existing image on N5K that's maybe too old to recognize the Nexus 2232 TM which has been manufactured later on...
Can you confirm this? I've looked for some release notes about the 2232TM without any success
Thank you for any help you can provide
Eric
