cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
320
Views
0
Helpful
0
Replies
Beginner

Nexus 3048 - no logs / counters for Traffic Storm Control

Guys,

We are evaluating a pear of Nexus 3048 using Spirent.

We are running on 5.0.3.U5.1d.bin .

We spotted an issue when testing the  Traffic Storm Control .

We set on the interface the storm-control multicast//broadcast  level to be 1 ( 10Mbps).

We sent using Spirent 30Mbps of broadcast traffic and and results were looking very good. Traffic was policed to 10Mbps.

But :

- no log entry or trap is generated

- the interface counters are clean :

SW2_LAB_DNOC# show interface ethernet 1/9 counters storm-control

--------------------------------------------------------------------------------

Port       UcastSupp %     McastSupp %     BcastSupp %     TotalSuppDiscards

                                                           (bytes)

--------------------------------------------------------------------------------

Eth1/9            100.00            1.00            1.00                     0<<<<<<<<<<<<<<<

We are running the latest code 5.0.3.U5.1d.bin .

Is there any hope to fix this problem in future releases ?

Thank you,

Victor Pirvu

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards