cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

115
Views
0
Helpful
1
Replies
Beginner

Nexus 5548 and L3

Hello,

Is the L3 daughter card required for connected inter-vlan routing and static routing? Or is it only for dynamic routing?

If I have the base license but not the L3 daughter card, am I still able to create L3 SVIs?

Forgive my ignorance as I am trying to get my head around it! I am trying to figure out if the daughter card is needed for any sort of layer 3 configuration such as SVIs.

Thanks,

ck

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Rising star

Without the L3 daughter card

Without the L3 daughter card you have in effect just a Layer 2 switch, no layer 3 functionality.

See below a similar discussion on the L3 daughter card for the 55K:

https://supportforums.cisco.com/discussion/12475461/create-new-vrf-n5548

Don't forget to rate all posts that are helpful.

1 REPLY 1
Highlighted
Rising star

Without the L3 daughter card

Without the L3 daughter card you have in effect just a Layer 2 switch, no layer 3 functionality.

See below a similar discussion on the L3 daughter card for the 55K:

https://supportforums.cisco.com/discussion/12475461/create-new-vrf-n5548

Don't forget to rate all posts that are helpful.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards