cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2005
Views
0
Helpful
2
Replies

Nexus 5K and 7K banner

Difan Zhao
Level 5
Level 5

Hi experts,

When I ssh or telnet to my Nexus switches, it first displays messages configured in "banner motd". Then it will prompt for "login:" and "password". Then it will display something like:

"

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

"

Is that something I can replace with my own messages? I can't find it in "show run all". Can't use "banner" command to change it either...

Thanks,

Difan

1 Accepted Solution

Accepted Solutions

Oleksandr Nesterov
Cisco Employee
Cisco Employee

Hi Difan

It's not possible to remove the banner.

Nexus follows GPL requirements and prints it every time you login.

HTH,

Alex

View solution in original post

2 Replies 2

Oleksandr Nesterov
Cisco Employee
Cisco Employee

Hi Difan

It's not possible to remove the banner.

Nexus follows GPL requirements and prints it every time you login.

HTH,

Alex

Thanks for the confirmation Alex.