Nexus 7000 F3 Line card for vPC Peer Link

[edwardwaithaka]

Is it possible to have vPC peer link on the F3 line cards?

[Reza Sharifi]

See table-1 in this link

As of 6.2, F1 and F2 only

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/interfaces/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide-6x_chapter_01000.html#concept_995147A21DB0416AB2910378BB58100B

HTH

[InayathUlla Sharieff]

Reza,

We can configure the peer-link on F3 card as well, Now I need to send email to the concern people to add that on the data sheet.

I have configured VPC peer-link on F3 card  for one of my customer and its working fine.

Regards

Inayath.

[edwardwaithaka]

Hi,

Thank you, I will also test once I get the equipment. I had seen the documentation but wanted to cross check. 

[edwardwaithaka]

Anyone with hands on experience on the Nexus 9000?

https://supportforums.cisco.com/discussion/12523956/vpc-peer-links-n9508-and-n9300

[Reza Sharifi]

Thanks Inayath!