cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

2168
Views
0
Helpful
3
Replies
Highlighted

Nexus 7000 M2 Module and OTV Support

Hello Guys,

Can someone confirm if the M2 linecard will support OTV or not, I just cant find relevant information about this on Cisco website.

Best Regards

Mohammed Khair

Mohammed Khair Khomakho CCIE Routing and Switching #26682
Everyone's tags (7)
1 ACCEPTED SOLUTION

Accepted Solutions
Participant

Nexus 7000 M2 Module and OTV Support

Hi Mohammed

OTV is supported on the M1 and M2 modules - You can't use a F1 or F2 module for OTV. Have a look at:

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-b

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-c

Regards

Marcel

3 REPLIES 3
Hall of Fame Community Legend

Re: Nexus 7000 M2 Module and OTV Support

Because OTV is a Layer 2 stuff, it should be supported in F1/F2 cards.  Make sure you have the right NX-OS running.  Check the Release Notes because you need to be running the right NX-OS to get OTV running as well.

You'll need to have the "LAN_TRANSPORT_SERVICES_PKG" Feature Based License (Product ID:  N7K-TRS1K9).

Cisco Nexus 7000 Series OTV Quick Start Guide

Cisco Nexus 7000 Series NX-OS OTV Configuration Guide

Participant

Nexus 7000 M2 Module and OTV Support

Hi Mohammed

OTV is supported on the M1 and M2 modules - You can't use a F1 or F2 module for OTV. Have a look at:

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-b

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-c

Regards

Marcel

Nexus 7000 M2 Module and OTV Support

Hello Marcel,

That is exactly what I needed.

Many Thanks

Mohammed Khair Khomakho
CCIE Routing and Switching #26682

Mohammed Khair Khomakho CCIE Routing and Switching #26682
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards