cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3035
Views
0
Helpful
3
Replies

Nexus 7000 M2 Module and OTV Support

Hello Guys,

Can someone confirm if the M2 linecard will support OTV or not, I just cant find relevant information about this on Cisco website.

Best Regards

Mohammed Khair

Mohammed Khair Khomakho CCIE Routing and Switching #26682
1 Accepted Solution

Accepted Solutions

Hi Mohammed

OTV is supported on the M1 and M2 modules - You can't use a F1 or F2 module for OTV. Have a look at:

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-b

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-c

Regards

Marcel

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

Because OTV is a Layer 2 stuff, it should be supported in F1/F2 cards.  Make sure you have the right NX-OS running.  Check the Release Notes because you need to be running the right NX-OS to get OTV running as well.

You'll need to have the "LAN_TRANSPORT_SERVICES_PKG" Feature Based License (Product ID:  N7K-TRS1K9).

Cisco Nexus 7000 Series OTV Quick Start Guide

Cisco Nexus 7000 Series NX-OS OTV Configuration Guide

Hi Mohammed

OTV is supported on the M1 and M2 modules - You can't use a F1 or F2 module for OTV. Have a look at:

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-b

http://www.cisco.com/en/US/products/ps9402/prod_models_comparison.html#~tab-c

Regards

Marcel

Hello Marcel,

That is exactly what I needed.

Many Thanks

Mohammed Khair Khomakho
CCIE Routing and Switching #26682

Mohammed Khair Khomakho CCIE Routing and Switching #26682
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: