cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

12314
Views
10
Helpful
3
Replies
joseluis68
Beginner

Nexus 9000 don't create vdc

I have 2 nexus 9000 C9348GC-FXP conected by vPC

 

When I try to create a vdc :

SWITCH01#
NWITCH01# conf t
Enter configuration commands, one per line. End with CNTL/Z.
SWITCH01(config)# vdc NEWVDC
                                 ^
% Invalid command at '^' marker.
SWITCH01(config)#

 

Why don't create new VDC

 

Thanks

1 ACCEPTED SOLUTION

Accepted Solutions
DominikPecak
Frequent Contributor

VDC are supported only on Nexus 7000/7700.

View solution in original post

3 REPLIES 3
Kirk J
Cisco Employee

Greetings.

From https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/6-x/high_availability/guide/b_Cisco_Nexus_9000_Series_NX-OS_High_Availability_and_Redundancy_Guide/b_Cisco_Nexus_9000_Series_NX-OS_High_Availability_and_Redundancy_Guide_chapter_0...

 

Virtual Device Contexts

Cisco NX-OS can segment operating system and hardware resources into virtual device contexts (VDCs) that emulate virtual devices. The Cisco Nexus 9000 Series switches currently do not support multiple VDCs. All switch resources are managed in the default VDC

 

Thanks,

Kirk...

DominikPecak
Frequent Contributor

VDC are supported only on Nexus 7000/7700.

I wonder what happens with VDCs when they EOL the 7k series Nexus because I am sure its coming eventually due to the push to 9k and ACI.