Does VXLAN EVPN inter-vxlan routing work in data plane on Nexus 9000v? I followed steps documented, but the ping messages don't pass between vxlans. Intra-vxlan traffic has no issue.
There are just vxlan type-2 routes inside BGP EVPN table, but no any type-5. Why isn't there any type-5 routes?
here is my shared configs of VTEPs (nexus 9000v (nxos.7.0.3.I7.2)):
fabric forwarding anycast-gateway-mac 1234.5678.90ab ! vlan 2 vn-segment 2 name customer_A_vlan vlan 3 vn-segment 3 name customer_B_vlan vlan 4 vn-segment 4 name customer_A_L3_routing_vxlan_vlan vlan 5 vn-segment 5 name customer_B_L3_routing_vxlan_vlan ! vrf context A vni 4 rd auto address-family ipv4 unicast route-target both auto route-target both auto evpn vrf context B vni 5 rd auto address-family ipv4 unicast route-target both auto route-target both auto evpn ! interface Vlan2 description customer A no shutdown vrf member A ip address 18.104.22.168/29 fabric forwarding mode anycast-gateway ! interface Vlan3 description customer B no shutdown vrf member B ip address 22.214.171.124/29 fabric forwarding mode anycast-gateway ! interface Vlan4 no shutdown vrf member A ip forward ! interface Vlan5 no shutdown vrf member B ip forward ! interface nve1 no shutdown host-reachability protocol bgp source-interface loopback1 member vni 2 mcast-group 126.96.36.199 member vni 3 mcast-group 188.8.131.52 member vni 4 associate-vrf member vni 5 associate-vrf ! router bgp 2 address-family ipv4 unicast address-family l2vpn evpn neighbor 184.108.40.206 remote-as 2 update-source loopback1 address-family ipv4 unicast send-community send-community extended address-family l2vpn evpn send-community send-community extended vrf A address-family ipv4 unicast advertise l2vpn evpn vrf B address-family ipv4 unicast advertise l2vpn evpn ! evpn vni 2 l2 rd auto route-target import auto route-target export auto vni 3 l2 rd auto route-target import auto route-target export auto
intra-vxlan traffic is fine. but between vxlans, isn't.