10-06-2017 05:43 PM - edited 03-01-2019 01:40 PM
I don't understand , whenever i start working on UCS Director my otv isn't AED capable. i've verified the mtu on core and correct it. But it isn't working...
Overlay interface Overlay1
VPN name : Overlay1
VPN state : UP
Extended vlans : 100 105 (Total:2)
Join interface(s) : Eth3/17 (10.2.0.9)
Site vlan : 99 (up)
AED-Capable : No (No Overlay Remote Adjacency up)
Capability : Unicast-Only
Is Adjacency Server : Yes
Adjacency Server(s) : [None] / [None]
10-13-2017 09:15 AM - edited 10-15-2017 09:29 AM
Can you send the show run otv command output and also the show interface for the join interface. Also make sure that your join interface is in the up/up. Also make sure the other side is not the Adjacency Server as well.
10-15-2017 02:00 PM
You're right. It helped !!
10-15-2017 03:37 PM
Awesome. I’m glad I was able to help. Have a great day. Could you mark as helpful and correct.
Thank you.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: