I had 1 port become loose and the Gbic would stay snuggly in. I put in a TAC Case and was sent a replacement chassis. Now I need to transfer all modules and license to the new chassis during a maintaince window. I am trying to come up with a step by step plan (in order) of all that needs to be done. Below is my plan with questions in parenthesis. Could some review and see if I am on the right track and provide any relevent documentation.
Thanks to all in advance.
Check software level and upgrade or downgrade as needed
Rack mount new chassis
Get all license from old chassis to transfer to new one. (Not sure of steps to do this. Any advise would be appreciated.)
Get config of old chassis
Power down old chassis
Swap all module to same slots, as on old one
Swap cables, from old chassis to new chassis, 1 for 1 to same ports
About this webinar
Cisco Application Centric Infrastructure (ACI) is designed API first, making it an automator’s, developer’s and programmer’s dream. When every aspect of a product is available via an API, there is no limit to the scale, robustnes...
Community Live - Application Centric Infrastructure: Introduction and Configuration Best Practices
This special event - formerly known as webcast- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are accessible o...
This year, Cisco is coming back to Pure Accelerate from September 15-18 as a Platinum Sponsor, where we’ll highlight our converged infrastructure joint solution, FlashStack, in booth 204. We are excited to highlight Cisco and Pure Storage's great pa...