03-27-2015 02:46 AM
Hi all,
Need some suggestion. Has an UCS environment, two FIs one Blade Chassis 6 Blade Servers, 2 Servers with 256Gig Mem and 4 with 128Gig Mem.2 Servers with 128 and two servers with 256 Gig working correctly from the beginning. Then we tried to add Servers 5 and 6 with 128Gig, associated the blades to a copy of the same server profile like the other which are working but the vnics could not be pinned to the uplinks so the vnics are in down state. I know that the OS has to be installed, but the network connection of the KVM is dropped although there are enough
I tried to disassociate, decommission the server and re-discover the blade and associated it again but nothing helped. Did anybody face that issue?
Thanks in advance
03-27-2015 05:31 AM
Well, I found the problem. Customer had duplicate IP addresses for the 2 Blades which were added. I was a bit confused that 2 addresses from the KVM range were double.
03-29-2015 12:39 PM
It sounds weird, maybe one was statically assigned. Are your interfaces pinned now?
-Kenny
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide