03-26-2014 06:32 PM
i have a single c220 server
Bios version: C220M3.1.5.1c.0 (Build Date: 01/31/2013)
FW version 1.5(1b)
dual Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz with 64 GB each
i have 4 existing HD, they are working
i have added two new SSD drives
cimc sees them
the ONLY function i can do is add them as global spares
i want to format them as a raid 1 pair and use them to store and run my vmware clients
nothing else from the GUI shows how to get the new drives format into raid
no help or details from any cisco documet either(;
Solved! Go to Solution.
03-27-2014 07:05 AM
Hello Walter,
Could you please attach an screenshot of the Virtual Drive tab too?
Also, the last disk needs replacement cause it logged a Predictive Failure which means that the disk is running out spare sectors to replace the damaged ones.
Rate ALL helpful answers.
-Kenny
03-27-2014 07:05 AM
Hello Walter,
Could you please attach an screenshot of the Virtual Drive tab too?
Also, the last disk needs replacement cause it logged a Predictive Failure which means that the disk is running out spare sectors to replace the damaged ones.
Rate ALL helpful answers.
-Kenny
03-27-2014 03:28 PM
08-31-2014 02:45 PM
tnx
i just added two more HDD and followed your advise. excellent tip from YOU
09-01-2014 09:00 AM
Glad to see it helped you :)
03-30-2014 09:50 AM
Walter,
Sorry for the delay. Try the following :
Go to Storage Tab> Select the RAID controller in the submenu> Select "Controller Info" > Select "Create Virtual Drive from Unused Physical Drives" (See "controller Info.png"). Give the process some time to complete.
Let me know if that works.
-Kenny
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: