Innovative platform tests Optical and IP Networks and will help Service Providers reduce operating costs and deliver innovative services faster
Madrid, 17th September 2014. – Cisco and Telefónica have announced the creation of an advanced testing platform to jointly explore and capitalize on the benefits of converged IP and optical networks.
Convergence of IP and optical networks based on IETF standards makes it possible to unify the planning, management and engineering of optical network layers and IP network layers, with a consequent improvement in efficiency and cost savings.
Telefónica will be leveraging the Cisco Open Network Architecture comprised of the Evolved Services Platform (ESP) and Evolved Programmable Network (EPN) which combine both hardware and software to deliver innovative capabilities for global carriers. These capabilities include virtual network functions (NfV), software-defined networking (SDN) and advanced orchestration functionality.
Over the next two years, Cisco and Telefónica will be jointly using the Cisco WAN Automation Engine software, which automates and optimizes the engineering of the WAN network, provisioning flexible SLAs (Service Level Agreements) and ultimately, creating a better user experience.
Telefónica and Cisco will collaborate on different use cases extracted from the Telefónica network topology, including multilayer restoration, the creation of a multidomain route and a multilevel by-pass, all of this with a multi-vendor approach in order to guarantee compatibility between products from different manufacturers.
The tests will be based on various hardware solutions from Cisco and other vendors that are widely used in the market. Cisco gears included such as Cisco CRS Series routers and transport platform Cisco Network Convergence System 2000.
The testing platform with also be using Cisco nLight, which is multilayer control technology (GMPLS, Generalized Multiprotocol Label Switching) facilitating the exchange of information between the IP and optical layers to optimize operations and maximize the benefits of a convergent transport network.
Telefónica will be validating models which help minimize investment cost (by means of redundant and underutilized resources) and to achieve a unified network architecture that is more efficient, less complex and easier to upscale, downscale and operate, enabling it to obtain significant savings in operating and capital costs.
The testing platform -located within Telefónica R&D facilities- is the first in its class in Spain, and consists of a multidisciplinary team formed by engineers and researchers from Cisco and Telefónica.
Enrique Blanco, Global Chief Technology Officer of Grupo Telefónica: "We are delighted to be collaborating with a world leader in networks like Cisco to optimize our core network architecture and respond to the exponential growth of traffic in both capacity and complexity, as well as reducing our costs and contributing to the standardization of the IP Class Optical Convergence technology."
Bill Gartner, Vice President of Optical Networking Group at Cisco: "Architectural approaches based on network layers that are constructed and run independently generate inefficiencies of scale, provision and operation that must be resolved as soon as possible. What we need is an innovative focus capable of creating an optimally convergent transport infrastructure, and that's what we, along with Telefónica, are trying to provide leveraging SDN technology benefits."
Cisco (NASDAQ: CSCO) is the worldwide leader in IT that helps companies seize the opportunities of tomorrow by proving that amazing things can happen when you connect the previously unconnected. For ongoing news, please go to http://thenetwork.cisco.com.
I'm trying to confirm SR to replace 6PE in a lab that I'm running. I've attached a couple of pictures to show how I understand the setup to work (and to show how bad my handwritting is and how much I love to color code ) Firstly this is how I unders...
I'm fairly new to ASR. We got a 4X100GE-SE with 4 CPAK-100G-SR10. a LOW_RX_PWR error comes up on every lane with the following on show pfm location all - running on RSP880-SE with IOSXR 5.3.4 CURRENT TIME: Sep 19 15:27:26 2020PFM TOTAL: 4...
6PE OverviewThe Cisco 6PE solution enables IPv6 domains to communicate with each other over an MPLS IPv4 core network. MP-BGP in the IPv4 network is used to exchange IPv6 reachability information along with a label for each IPv6 prefix announced. 6PE rout...
This document summarises various health checks that can be done on a Cisco VIM pod.
Cloud sanity checks the health status of network, storage and various openstack infrastructure components like mariadb, rabbitmq etc....
Hello everyone, I'm struggling to understand what is the role of the Admin Plane user accounts.For both cXR and eXR, when going from XR CLI to Admin CLI (using "admin" command), I'm always correctly authenticated, no login prompt appear when I go to ...