Hi Folks, Hitesh Kumar (CCIE SP #38757) and myself Rahul Rammanohar CCIE (R&S, SP #13015) work for the High Touch Technical Support (HTTS) team here at Cisco. Our team provides reactive technical support to majority of Cisco’s premium customers. We have created the following video that includes packet capture capabilities across multiple Cisco routers and switches. For each product, we start off by talking about the theory of the capability, followed by an explanation of the commands and finally a Demo on real devices.
We will take your questions and follow up on this video with an 'Ask The Expert' event soon, look forward to seeing you there.
Agenda with the timestamp when each of the packet capture capability begins.
00:00 - Introduction
01:20 - 7600/6500 - Mini Protocol Analyzer (MPA)
08:39 - 7600/6500 - ELAM
15:30 - 7600/6500 - Netdr
19:38 - ASR9k - Network Processor Capture
28:00 - 7200/ISRs - Embedded Packet Capture
34:55 - Nexus 7K, 5K and 3K - Ethanalyzer
43:42 - Nexus 7K - ELAM
52:37 - CRS - Show Captured Packets
56:45 - ASR1K - Embedded Packet Capture
Thanks for watching our video, feel free to post your questions, comments and feedback below.
Is VPLS multi-homing from a CE to (2) PE devices supported in IOS-XE on the ASR 9000?I have a feeling that the answer is no, since I do not see any documentation related to it other than a community forum question from 2011:https://community.cisco.com/t5/...
This guide will explain how to check where a particular directory resides within the filesystem in terms of physical disk, logical volume, volume group, etc by taking a look at where the install repository actually resides on an NCS5500.
Dear All,I have a topology which represent an ISP MPLS Core Network. the topology use BGP, OSPF, EIGRP, MPLS and VRFs. the topology consist of 5 BGP autonomous systems, 4 autonomous system have 2 customer sites. 1 autonomous system connect the 4 ...
I've recently upgraded a pair of NCS-5001 from 6.1.4 to 6.5.3 successfully. I've just noticed a difference in the output on "show install active". One is reporting "Boot Partition: xr_lv25", the other is reporting "Boot Partition: xr_lv30". I can't f...