Watch the TechWiseTV geeks dive right into the enterprise device with an unboxing, a multi-media test-drive, a look at the app development, and a complete security teardown with hands on demos and enterprise use cases.
Hi All, Just need some help with my DHCP realy config on Cisco NCS540 running XR 7.1.1 Actually i was using Huawei switch before and below are the configs on Huawei for the DHCP. interface Vlanif20description 1st NNI - Voice Vlanip address ...
view more
Hi I'm trying to configure a EoMPLS on 2 different router and enable traffic on a VRF.So what I want to do is:R1----R2----R3 R1 is on a Routing Area and R3 is on another one, all three Router know each other witch OSPF.The traffic from R3 come on my ...
view more
Hello colleagues ! I plan to test the MPLS functionality (L3VPN/VPLS/EoMPLS) on the 3850 platform, but I have a question about the correct mpls mtu setup. #mpls mtu ?<64-1500> MTU (bytes)override Override mpls mtu maximum of interface...
view more
Introduction
Prior to Cisco IOS XR Software Release 7.1.2, XR dual RP devices did not support file mirroring from active RP to standby RP. Administrators had to manually perform the task or use EEM scripts to sync files across active RP and stand...
view more
Can someone shed some light on this? I cannot find anything on Cisco's site on the ONS-C2-WDM-DE-1HL. I know they will both function on the A9K-MPA-2X100GE (6.5 and up) - we run 6.7.1 I'd like to find some technical data/specs but ca...
view more
