Register today for this free ThinkSmallCell webinar on September 4, Thursday, featuring Cisco’s Alan McNab and our partner iBwave who will talk about how we’re working together to streamline Enterprise Small Cell deployments for Mobile Operators.
At this webinar, we will be discussing:
How the incremental cost of adding cellular service to an Enterprise Wi-Fi deployment can be as low as 20%;
When and why the RF design can be assigned to field technicians and personnel with basic IT background;
What the main concerns and bottlenecks that constrain this approach are.
We’ll discuss real-world perspectives from the field, where we are actively trialing and deploying products in countries worldwide, and answer the challenging questions about the feasibility of this approach.
Participants will also have the opportunity to put their own questions to the panel and participate in audience polls.
David Chambers, Senior Analyst at ThinkSmallCell, has been focused on the Small Cell market and watched it evolve over the past 7 years.
Alan McNab, Global Small Cell Go-To-Market for Cisco. He brings knowledge from extensive field experience from deployment for both Wi-Fi and Small Cells.
Benoit Fleury, VP Products and Innovation iBwave, is responsible for evolving iBwave’s current products as well as expanding the company’s overall product portfolio.
Thursday, September 4, 2014, 8:00 AM - 9:00 AM PDT / 11:00 AM - 12:00 PM EDT
Hello, How to connect a potential free contact to an IP phone CP7911 en CP7942?
We want to give a signal with a lamp when there is an incomming call.This is because the phone is in a loud admosphere.
Thanks for your help.
How to check whether L2VPN is forwarding MAC and L2 traffic on ASR9K.
My topology : BRAS <-> ASR9K <-> OLTs
In my case, ASR9K has learnt a mac from OLT but BRAS couldn't receive any traffic and MAC from ASR9K.
I'm suddenly having an issue with CSM where it cannot log into my 9k hosts using ssh.I have no issue using the same account SSH'ing directly to the host.By symptom it appears a password issue, but I've verified the password and tried a few different valid...
I'm having problems with configuring cgn over CRS-X. I have three service app inside with different vrfs. My doubt is If I can configure three service app outside for each inside application or just to ha...
So if my reasearch is correct there is no data sheet or info online that explicitly says "layer 3 throughput =x". What I do find is that Max Packets Per Second based on 64 Byte packets would be the only Layer 3 performance info available from cisco....