Monitoring Power-supplies is done using the ENTITY-MIB (RFC-2737) and MIBs which extend/supplement the ENTITY-MIB. The ENTITY-MIB’s entPhysicalTable defines the MIB identifierfor an inventory item, entPhysicalIndex, which is used by the other MIBs extending ENTITY-MIB information.
The relevant Cisco extensions to the ENTITY-MIB supported:
NOTE: In XR Power Supply information is considered “admin” restricted information which is therefore only accessible via community-strings/usernames configured with the “SystemOwner” keyword, ie. “snmp-server community adminLevelCommStr RO SystemOwner” (then poll with “adminLevelCommStr” as community-string).
Use the entPhysicalTable to determine the physical hierarchy of entities. The entPhysicalTable maps entPhysicalIndex values to the other identifying information for each physical entity modeled in the system. The hierarchy of entities is learned using the following objects:
Indicates the generic type of entity being modeled.
Indicates the parent entity for the entity being modeled.
Indicates the position number of the entity within its parent entity relative to other entities of the same class.
entPhysicalTable Hierarchy for ASR9K Power-Supply Entities
The entity hierarchy visualization:
Entity Hierarchy Visualization for Power Supplies with Entity Details
We have a number of situations where we are interfacing with CE's using 1000BaseSX (both SFP-GE-S and GLC-SX-MMD). It's not the case every time, but there also doesn't appear to be much of a pattern. I'm curious as to why this command would be...
Hi, Guys, I'm a beginer with NSO, and now i want to re-deploy a service to fix the broken configs, but i can't remove any other out-of-band configs that have been made to the device, what command or step i should do to implement this? Any help w...
Hello everybodyI have a problem implementing Multicast in a small provider with some VRFs.Attached is a diagram that can be used to better understand the typology. As you can see we have two types of routers R1 is an XR and R2 is an xe, in both...
Is there a link on proper way to downgrade the IOS on ASR 1001-X? Currently one unit is on 17.x. I know the simple way would be to wipe flash and reinstall IOS 16.x but we have licenses on the ASR1001-X that we need to preserve. &nbs...