IOS-XR has a very strong embedded mechanism to do user authentication and authorization. While XR does not have the concept of privilege-levels as what IOS had, the embedded user task group management is extremely strong allow for the creation of different task groups.
Building blocks for on-box authorization scheme 4 types of permissions per task
The following task-groups are predefined in IOS-XR
Hi Friends, I have an ASR 1001(Cisco IOS XE Software, Version 03.16.01a.S/Cisco IOS Software Version 15.5(3)S1a).I checked it, but can't configure 'MPLS ldp', and no MPLS command under the interface. My question is which lowest release can ...
It is established that auto-upgrade should be disabled during an XR upgrade process. However, what is recommended for normal operations? I can see the advantage of having "auto-upgrade" in place so that any RMA or new LC's would/should be upgra...
Hi Everyone, I'd like to know what is most MPLS providers' SOP for their COS especially for Premium i.e. Voice. If you subscribed 10M Premium and exceed that amount, what happens? Assuming the the entire pipe purchased is 100Mb for argument sake and ...
TRAI Regulation on Inbound outbound calling in Domestic Call centres in India As govt of India is promoting to create jobs in rural area's in Big way we are getting stuck as there is no clarity of making or receiving calls in our centers in Rural Are...
Hi, I'd like to ask how to check via SNMP signal to noise ratio or number of codewords (without errors, with correctable errors etc.) on interfaces connected to CTMS via R-PHY shelf. So far, I've been using OIDs from DOCS-IF-MIB (like for exampl...