This is the slides for the live webcast. During the live event you get an overview of the Cisco Cable Modem Termination System (CMTS) platforms and the uBR product family. Eric Bautista will review the various hardware components and the role of a CMTS in a cable multiple system operator (MSO) network. Bautista will also provide some basic configuration and troubleshooting examples. Given this information, the learner will be able to identify what platform and modules are being used. They will also be able to describe the hybrid fiber coax (HFC) topology and the current state of the cable interfaces.
Eric Bautista is a customer support engineer at the Cisco Technical Assistance Center (TAC.) He is responsible for supporting the Cisco uBR CMTS platforms. He has 3.5 years of experience in cable technology. Previous to his current role, Bautista supported Cisco WAN and optical technologies, including QoS and SONET/SDH.
Hi,Previous we were using Cisco 7606 as BRAS and the issue was Router keeps on rebooted automatically.OLD Details about Cisco 7606Router 7606 #show versionCisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.2(2)S...
I have successfully registered my SIP endpoints (which we have developed) with Broadsoft sandbox environment. I can make basic calls without problems. When I try to conduct feature tests like Call Waiting (CW), Call Hold (CH), and Call Transfer (CT)...
I am trying to find if there is any Pros or Cons in deploying MPLS with separate customer AS for each site as opposed to one AS. The end goal is to be able to inject default routes from two DCs and be able to make a subset of sites follow one default rout...
So I have attempted the below config: l2vpn
backup disable never
xconnect group Xconns