Cisco Crosswork Network Automation is a micro-services platform that brings together streaming telemetry, big data, and model-driven application programming interfaces (APIs). This demonstration highlights the Cisco Crosswork applications Health Insights and Change Automation.
Health Insights is a network health application that performs real-time key performance indicator (KPI) monitoring, alerting, and troubleshooting.
Change Automation is an application that automates the process of deploying changes to the network.
Scenario 1: Add Devices, Verify Initial Topology, and Router Configuration
Scenario 2: Configure KPIs in Health Insights
Scenario 3: Verify KPIs
Scenario 4: Detect a Problem in the Network
Scenario 5: Remediate Issues with Change Automation
Scenario 6: Apply Software Update with Change Automation
Scenario 7: Blackhole Detection
● Cisco AnyConnect®
Crosswork Network Automation 2.0
Health Insights 2.0
Change Automation 2.0
IOS XRv 9000 6.2.1
Crosswork Network Automation
Application infrastructure based on Industry Standards
Collector services for apps with Normalization
Monitor KPIs in Real Time
Alerts on spikes and drops
Configure SLA thresholds
Automate network changes
Closed loop detection and resolution
Virtual environment for building network topologies
Simulation of networking components
Capable of running a range of virtual machines (VMs) running Cisco operating systems (IOS-XE, IOS Classic, IOS-XR, and NX-OS)
Support for third-party VMs
Capture and analyze network traffic at any node
Validate configurations prior to physical deployment
IOS XRv 9000
Full IOS XR control plane router
Traffic Generator with dynamic configuration
Can create background traffic in meshes between all nodes
On ASR-9904 Chassis with RSP5-SE. I was under the impression that the RSP - Chassis combo could support 1.8T per line card. However, when a A9K-8X100GE-TR is inserted, I get RATE LIMITED message. %FABRIC-FIA-1-RATE_LIMITER_ON : Set|fialc[...
Hey folks, I am trying to configure an intra-domain PCE/PCC setup with headend initiated ODN policy. It looks like PCEP is up and report messages gets delivered to the PCE, however it looks like the update messages aren't there and the ERO from PCC to PCE...
Hey folks, backgroundI am merging two ASes, AS100 and AS300. AS100 runs ISIS level-2-only and has SR enabled. AS300 runs ospf and ospfv3 and has LDP enabled. I have interconnected iosxr-9k-3 in AS100 to iosxrv-5 AS300 using a physical link and r...
I routinely have to lifecycle 50+ from a site. One of the longest parts of this process is documenting and transferring specifics onto the new phone profile IE. Extension, Identifying name, ECT.Is there anyway to transfer a phone profile to a different ty...
Hello,during SMU installation on NCS5501-SE, IOS XR 7.1.2 I almost run out of a disk space. Here is the warning%HA-HA_WD-3-DISK_ALARM_ALERT : A monitored device / ( rootfs:/ ) is above 80% utilization. Current utilization = 85. Please remove unwanted user...