OpenDaylight (ODL) is a collaborative, open-source project used to advance software-defined networking (SDN). OpenDaylight is a community-led, industry-supported framework consisting of code and blueprints. Using this framework, you can accelerate process adoption, foster innovation, reduce risk, and create a more transparent approach to SDN. OpenDaylight can be a core component within any SDN architecture. Building on open-source SDN and NFV controllers enables users to reduce operational complexity, extend the life of their existing infrastructure hardware, and enable new services and capabilities only available with SDN.
This demonstration uses Virtual Internet Routing Lab (VIRL). VIRL is a multi-purpose network virtualization platform that provides an easy way to build, configure, and test new or existing network topologies with an intuitive user interface.
Scenario 1: Explore ODL Features
Scenario 2: Explore DLUX
Scenario 3: Install BGP Pathman Application
Scenario 4: Enable OpenFlow in Karaf
Scenario 5: Install OpenFlow Manager Application
Scenario 6: Explore Pathman Segment Routing
Scenario 7: Explore netACL Application
Scenario 8: Explore Yangman
Optional: Cisco® AnyConnect®
ODL Carbon SR3
PC Workstation at 198.18.133.252
Includes PuTTY with shortcut for ODL host
Chrome with some extensions
Virtual environment for building network topologies
Simulation of networking components
Capable of running a range of virtual machines (VMs) running Cisco operating systems (IOS-XE, IOS Classic, IOS-XR, and NX-OS)
Support for third-party VMs
Capture and analyze network traffic at any node
Validate configurations prior to physical deployment
Hello, We are working on a lab deployment of SRv6 across two ASR9001 platforms running 6.6.3 software. We are using IS-IS as our IGP so we will be pushing the locator prefixes across the devices using that. I was following the cisco segment routing c...
Hi Dear FriendWhen i Type show platform software process slot FP active monitor This is CPU usage for ASR1000-ESP5 Cardembedded services processor OR Show Me CPU And Memory Usage of Card ASR1002-RP1 The Export Of command is...
We are upgrading to a 1 gig circuit from our ISP We currently have two routers in a BGP config giving us 200/100 net speed with a customer provided subnet that's a /24To go to the 1Gig they installed a ASR 920-24SZ(?) and applied a temp /30 for us to...
Have a CISCO2951/K9 router with a T3 card SM-X-1T3/E3; router goes down frequently and am wondering if these error messages indicate a possible card or router failure? Have not been able to locate much info the log messages. from show plat...