Cisco® Virtual Internet Routing Lab (VIRL) is a multi-purpose network virtualization platform that provides an easy way to build, configure, and test new or existing network topologies with an intuitive user interface (UI). VIRL enables customers to support critical missions, such as designing, training, release testing, and configuration staging, without the expense of buying and staging real network hardware. This demonstration requires familiarity with Cisco networking architecture and routing fundamentals.
Scenario 1: Modify an Existing Sample Topology
Optional: Cisco AnyConnect®
Topology Visualization Engine 0.17.28
Live Network Collection Engine 0.12.6
VM Maestro 1.5.0-507
The following platform reference model VMs are available for internal users:
IOSv - 15.6(3)M (New)
IOSv L2 - 15.2 (03.2017)
IOS XRv - 6.1.3 image
IOS XRv 9000 - 6.2.2 image (NOT BUNDLED, must be installed from the VIRL Software page in the UWM) (New)
CSR 1000v - 16.6.1 XE-based image (New)
NX-OSv 188.8.131.52 (Nexus 7000)
NX-OSv 9000 7.0.3.I7.1 (Nexus 9000) (NOT BUNDLED, must be installed from the VIRL Software page in the UWM) (New)
ASAv 9.8.2 (New)
Ubuntu 16.04.3 Cloud-init image (New)
This demonstration uses the following Linux container images:
Ubuntu 16.04 LXC
iPerf 2.0.2 LXC
Routem 2.1(8) LXC
Ostinato-drone 0.8 LXC
Cisco VM Maestro
Flexible network layout and connections
Intuitive interface for creating network configurations
Ability to run user interface locally and perform computations in the cloud
Virtual environment for building network topologies
Simulation of networking components
Capable of supporting a range of virtual machines (VMs) running Cisco operating systems (IOS-XE, IOS Classic, IOS-XR, and NX-OS)
Support for third-party VMs
Capture and analyze network traffic at any node
Validate configurations prior to physical deployment
Hello, I'm trying to turn off the critical led on a ASR-9006, but nothing works and I don't find anything on google. I see this output: show environment ledWed Jul 15 12:10:34.502 BRASILIAR/S/I Modules LED Status0/RSP0/*host Critical-A...
Hello, We're getting Cisco NCS-5501-SE 7.0.0 from Cisco. Before we use it in production I will update it to 7.0.2.Looking at update guide the main steps are here: router(config)#fpd auto-upgrade enable
install add source h...
Below is our scenario: PPPoE Server <---> G1-R1(ASR920)-G2 <------MPLS Core-------> G2-R2(ASR920)-G1 <----> PPPoE Client We configured xConnect between G1 of R1 to G1 of R2 and session was up. 1. If we configuration IP bas...
Hello, We are working on a lab deployment of SRv6 across two ASR9001 platforms running 6.6.3 software. We are using IS-IS as our IGP so we will be pushing the locator prefixes across the devices using that. I was following the cisco segment routing c...
Hi Dear FriendWhen i Type show platform software process slot FP active monitor This is CPU usage for ASR1000-ESP5 Cardembedded services processor OR Show Me CPU And Memory Usage of Card ASR1002-RP1 The Export Of command is...