Console access to the router and Router must be running release 5.3.2 or higher
System must not have 800G (tomahawk) line cards, (see caveat (a) in list below)
Before the upgrade process starts, and prior to removing any RP from the chassis, make sure that “show redundancy” shows NSR and standby card is ready.
Make sure any none 5.3.x software is removed from the system (ie admin install remove *4.3.4*)
Enable console logging on the router and on the terminal application (optional)
a)The system must NOT have Tomahawk(400G or 800G) Line cards in the chassis prior to attempting this as the EOBC link between Tomahawk and newly inserted RP2 will be down which will interfere with the failover from RP1 to RP2. If there are Tomahawk cards in the chassis, they need to be removed or powered down for the upgrade to be successful. ‘admin-config #hw-module power disable location 0/1/cpu0’
3) Upgrade process:
1)Issue show redundancy and make sure NSR and Standby card is ready
I have successfully registered my SIP endpoints (which we have developed) with Broadsoft sandbox environment. I can make basic calls without problems. When I try to conduct feature tests like Call Waiting (CW), Call Hold (CH), and Call Transfer (CT)...
I am trying to find if there is any Pros or Cons in deploying MPLS with separate customer AS for each site as opposed to one AS. The end goal is to be able to inject default routes from two DCs and be able to make a subset of sites follow one default rout...
So I have attempted the below config: l2vpn
backup disable never
xconnect group Xconns
In one of the discuss, it was initiated to us that there is a specific DB size for example:1 GB and breaching of which will led to crash of Iedge process.I want to replicate the scenario by creating load of user by tool in the lab and track the CDM db uti...
Some 15 years ago we had implemented a PWLAN service by deploying SSG on IOS and Cisco SESM (Subscriber Edge Services Manager) as the web interface (i.e. captive portal). Fast forward, SESM becomes EOL, gets replaced by Broadhop SME. Some years later...