Author: Dan HisawTelnet to the existing Netcrypt, and capture the output of the following commands:sessionprint_gige_port_infoprint_sl_dataprint_session_status(In the 3rd command, that’s “sl” as in “session list”). (Username: Netcrypt / Password: Net...
https://cisco.webex.com/cmp0306ld/webcomponents/jsp/docshow/closewindow.jsp
IntroductionTrunk and Carrier Based RoutingRelated Information Introduction This document covers the examples to configure the Trunk and Carrier based routing on an Originating and Terminating Gateway. Trunk and Carrier Based RoutingConfiguring Trun...
!/4.5.4/images/tiny_mce3/plugins/jiveemoticons/images/spacer.gif|jivemacro=toc|class=jive_macro jive_macro_toc|src=/4.5.4/images/tiny_mce3/plugins/jiveemoticons/images/spacer.gif! <span class="mw-headline">Introduction</span> +This document shares th...
The second phase of the Unified MPLS for Mobile Transport system architecture continues to evolve the mobile backhaul infrastructure design first outlined in UMMT 1.0. The UMMT 2.0 system continues to provide the architectural baseline for creating a...
Problem DescriptionResolution Problem DescriptionObserving MATE_UNAVAIL Errors on the PGW2200 for the CICs (Circuit Identification code) E1s connected to the Media Gateway AS5400 series. PGW2200 is configured in Nailed Mode and Interconnected with t...
at one time, in all accounting packets, fields Acct-Input-Packets Acct-Output-PacketsAcct-Input-Octets Acct-Output-Octetshave only zero. anyone seen it? Frame 175: 309 bytes on wire (2472 bits), 309 bytes captured (2472 bits)Ethernet II, Src: Nortel...
CTIA is All Things Mobile. Now with new dates in May, International CTIA WIRELESS® is even better positioned to meet the needs of the global wireless marketplace. It is the best opportunity to create a more personalized, powerful experience at the on...
i hace a module vwic2-1mft-e1/t1i want to change the card type from t1 to e1i could see card type e1 0 0 on my running-configbut controller still is t1and i could not enter "no controller t1 0 0" to remove controller of t1i need help
I'm using SPA 2100 VOIP ATA, it seems that the "Line Enable" field automatically turns to "No" after the internet connection goes down (even for a few seconds) and back up. I have to change it back to "yes" every time and then everything works fine.I...
IntroductionPGW2200: Collecting System related InformationHandling Alarms in PGW2200System Log filesPGW2200 Call TraceRelated InformationRelated discussion in CSC Introduction This document covers the Technotes for collecting the PGW2200 System rela...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: