Cisco® Virtual Internet Routing Lab (VIRL) is a multi-purpose network virtualization platform that provides an easy way to build, configure, and test new or existing network topologies with an intuitive user interface (UI). VIRL enables customers to support critical missions, such as designing, training, release testing, and configuration staging, without the expense of buying and staging real network hardware. This demonstration requires familiarity with Cisco networking architecture and routing fundamentals.Check it out here: https://dcloud-cms.cisco.com/demo/virl-1-5-137-sndbx-feb-rls-v1
Scenario 1: Modify an Existing Sample Topology
Topology Visualization Engine 0.17.27
Live Network Collection Engine 0.11.6
VM Maestro 1.3.0-497
The following platform reference model VMs are available for internal users:
IOSv - 15.6(2)T
IOSv L2 - 15.2 (03.2017)
IOS XRv - 6.1.3 image
IOS XRv 9000 - 6.0.1 image (NOT BUNDLED, must be installed from the VIRL Software page in the UWM)
CSR 1000v - 16.5.1b XE-based image
NX-OSv 126.96.36.199 (Nexus 7000)
NX-OSv 7.0.3.I6.1 (Nexus 9000) (NOT BUNDLED, must be installed from the VIRL Software page in the UWM)
Ubuntu 16.04.1 Cloud-init image
This demonstration uses the following Linux container images:
Ubuntu 16.04.1 LXC
iPerf 2.0.2 LXC
Routem 2.1(8) LXC
Ostinato-drone 0.8 LXC
Cisco VM Maestro
Flexible network layout and connections
Intuitive interface for creating network configurations
Ability to run user interface locally and perform computations in the cloud
Virtual environment for building network topologies
Simulation of networking components
Capable of supporting a range of virtual machines (VMs) running Cisco operating systems (IOS-XE, IOS Classic, IOS-XR, and NX-OS)
Support for third-party VMs
Capture and analyze network traffic at any node
Validate configurations prior to physical deployment
Hi My current active router is a 7200 with a PA-MC-E3 multichannel E3 card to connect our wan branches via ISP to our HQ. I want to replace this router with asr1006 but I am not sure which spa module should I use for E3 multichannel. Regar...
Hello All, I am new to multicast. And I have configured the Cisco XR router with a multicast configuration. Cisco XR is connected with a multicast receiver. and I see the following entries on Cisco XR. There are (*,G) and (S,G) entries. (*, G)'s...
Hello, What is the use of the "static-group" command under "router igmp" in cisco XR?When I configure router igmp interface Loopback0 join-group 188.8.131.52 ! interface GigabitEthernet0/0/0/1 static-group 224.12...
Hello Community members, I've got two ASR1001-X running 16.12.5 with SmartLincensing enabled and the router registered with the CSSM (directly to the Cisco CSSM, not On-Premise SSM). The FLSA1-1X-2.5-20G license is visible in the VirtualAcc...
Hello engineers,I have a question if this feature is fully supported on NCS 540 series. When there is L2 VPN service transporting CDP, VTP, STP etc. for end customer, this feature is useful for troubleshooting. This feature is fully supported on Cata...