cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

% UBR7200-3-ENVM_FAN_OVERLOAD on UBR7200

153
Views
0
Helpful
0
Comments

Issue :

=====

The following message is displayed when inserting more than 2 uBR-MC88V

####3

%IPCOIR-5-CARD_DETECTED: Card type DOCSIS Modem Card (Universal) 8 Down/8 Up (F-connector) with Integrated Up-converter (0x675) in slot 5/0

 

 %UBR7200-3-ENVM_FAN_OVERLOAD: Fan Tray overloaded, fail to support the linecard at slot 5

 

%UBR7200-3-ENVM_FAN_OVERLOAD: Fan Tray overloaded, fail to support the linecard at slot 6

 

%OIR-6-REMCARD: Card removed from slot 6, interfaces disabled

 

 

Please check the fan tray in the chassis.

####

 

The issue is expected as the ubr-vxr cannot support the cooling of more than 2 ubr-MC88V with the old FAN assembly

 

Solution:

========

Install the new fan assembly 

MAS-U7246VXR-FAN2

 

Reference :

=========

http://www.cisco.com/c/en/us/td/docs/cable/cmts/ubr7200/installation/4939sbc.html

Note You must use the new MAS-U7246VXR-FAN2 fan tray when the Cisco uBR7246VXR chassis is loaded with four Cisco uBR-MC88V line cards. However, you can load the router with up to two Cisco uBR-MC88V line cards and still use the old MAS-UBR7200-FAN fan tray. 

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards