The third phase of the Unified MPLS for Mobile Transport system architecture continues to evolve the mobile backhaul infrastructure design defined in the first two phases of UMMT. The UMMT 3.0 system continues to provide the architectural baseline for creating a scalable, resilient, and manageable mobile backhaul infrastructure that is optimized to seamlessly interwork with the mobile core. The system is designed to concurrently support multiple generations (2G/3G/4G) of mobile services on a single converged network with pseudowire emulation (PWE) for 2G GSM and 3G UMTS/ATM transport, L2VPNs for 3G UMTS/IP, and L3VPNs for 3G UMTS/IP and 4G LTE transport. It supports essential features like network synchronization (physical layer and packet based), H-QoS, OAM, performance management, and fast convergence. It is optimized to cater to advanced 4G requirements like IPSec and authentication, direct eNodeB communication through the X2 interface, multicast for optimized video transport, virtualization for RAN sharing, capability of distributing the EPC gateways, and traffic offload. UMMT 3.0 also provides information on Fixed Mobile Convergence deployment, showing how to deploy a converged mobile and wireline deployment supporting wireline residential, business, retail/wholesale L2VPNs and L3VPNs, and IP services.
Need input on the attached schematic i.e... whether Cisco 1921 would support the performance throughput in this scenario with 5Mbps MPLS WAN circuit & 100Mbps P2P Ethernet circuit?Throughput, MPLSThroughput, MPLS
Does anyone also see DUMPER crashes related to the ifindex_server process on his ASR9k? It looks like it's something with the snmp process... I have an open TAC but it's not a known bug. Maybe anyone else has also this problem...?
Good day!I have 2 Catalyst 3650 in stack (role intervlan routing)#show versionCisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.06E And 2 ISPs provide service VLAN to remote office - VLAN ID the...
We have an MPLS network in which a few of the P routers are connected to each other via GRE over a service provider. We are running MPLS IP over those GRE tunnels. We have configured an outbound QoS Shaping policy on those tunnel interfaces. However, the ...