What would be the procedures to upgrade/downgrade VDS-TC within 5.1.1 builds?
Answer: Upgrade and rollback between builds within the same 5.1.1 release is supported and done using the upgrade command and simply specifying different upgrade packages i.e.
In upgrade specify the following package: VDS-TC_GA_5.1.1b<xx>_Server_Cluster.tar.gz (Note: xx should be the newer version) In downgrade specify the following package: VDS-TC_GA_5.1.1b<yy>_Server_Cluster.tar.gz (Note: yy should be the older version)
Also please check cache size and volumes size before and after the upgrade, in case you see difference please run console#cache sync CLI command during normal cluster operation. This command will sync the cache with the content items located in CMDB.
Topology BriefThree isolated IGP domains AGG-A, AGG-B, CORE running ISIS level 2 onlySegment routing is enabled on all IGP domainsCORE10 (SRPCE) running BGP-LS all border routers to learn topology from all three domainsFor reachability between PE/PCC to S...
Hi team,My ASR 903 to start send message:%SYSHW-3-SYSHW_REG_WRITE: R0/0: emd: A register write operation has failed for device: CPU_I2C_Outlet_Temp_Sensor register: /sys/bus/i2c/drivers/max6654/10-0019/reg_configuration error: Input/output error. sys...
Hi, I am trying to use the configuration conversion inside the ASR9K to ASR9K-64 migration tools, but it prompts "Failed to get the publish date of the most recent NoX conversion tool on CCO.", How to solve it? Thank you. BR,Joe
Need input on the attached schematic i.e... whether Cisco 1921 would support the performance throughput in this scenario with 5Mbps MPLS WAN circuit & 100Mbps P2P Ethernet circuit?Throughput, MPLSThroughput, MPLS