This topic is a chance to discuss more about XRv9000 Virtual Router Architecture, installation and Troubleshooting. The Cisco IOS XRv 9000 Router is a cloud-based router that is deployed on a virtual machine (VM) instance on x86 server hardware running 64-bit IOS XR software. Cisco IOS XRv 9000 Router provides traditional Provider Edge services in a virtualized form factor, as well as virtual Route Reflector capabilities. Cisco IOS XRv 9000 Router is based on Cisco IOS XR software, so it inherits and shares the wide breadth of routing functionality available on other IOS XR platforms.
Ask questions from Monday, September 25th to October 6th , 2017
Sudhir Kumar is a customer support engineer in High-Touch Technical Services at Cisco specializing in service provider technologies and platforms. He has broad experience in IOS-XR platforms including Cisco CRS, ASR 9K and Cisco XR 12000 Series Routers. Sudhir has more than 12 years of experience in the IT industry and holds Triple CCIE certification (35219) in Service provider, Routing and switching and Data Center track.
Anilkumar Dantu is a customer support engineer of the Cisco High-Touch Technical Services that specializes in service provider technologies and platforms. He serves as a support engineer for technical issues supporting Cisco IOS XR Software customers on Cisco CRS, ASR9000 and Cisco XR 12000 Series Routers. Anil has more than 12 years of experience in the IT industry and holds Dual CCIE certification (22536) in Routing and switching and Data center track.
Sudhir and Anilkumar might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Contact CenterCommunity
Hi, We are facing issue with ASR 9904 line card. After power on line card status led is amber only and showing below errorRP/0/RSP0/CPU0:mes-ngl-pbx-pbx-cdi-1#0/RSP0/ADMIN0:Sep 19 15:14:28.524 UTC: canbus_driver: %PLATFORM-CANB_SERVER-3-ALARM_I...
How can I learn about ASR9K MPLS Label limits(LIB and LFIB max numbers).Is there any command to check on the device?
Are these limits changing with LCs and RSPs types.Is there any scaling document to get these values?
I want to learn about to 'Partially-programmed' errors at the output of command 'show l2vpn bridge-domain summary'. I can not find any related document about this part and how to troubleshoot if it is not equal to zero.
I am looking for...
Hi Friends, I have an ASR 1001(Cisco IOS XE Software, Version 03.16.01a.S/Cisco IOS Software Version 15.5(3)S1a).I checked it, but can't configure 'MPLS ldp', and no MPLS command under the interface. My question is which lowest release can ...
It is established that auto-upgrade should be disabled during an XR upgrade process. However, what is recommended for normal operations? I can see the advantage of having "auto-upgrade" in place so that any RMA or new LC's would/should be upgra...