Community Tech-Talk series is designed to bring technical Experts from
Cisco to share their insights on specific topics, selectively chosen
based on most-common conversation themes on our technology area on
community from our technology communities.This T...
Hi, We are facing issue with ASR 9904 line card. After power on line card status led is amber only and showing below errorRP/0/RSP0/CPU0:mes-ngl-pbx-pbx-cdi-1#0/RSP0/ADMIN0:Sep 19 15:14:28.524 UTC: canbus_driver: %PLATFORM-CANB_SERVER-3-ALARM_I...
How can I learn about ASR9K MPLS Label limits(LIB and LFIB max numbers).Is there any command to check on the device?
Are these limits changing with LCs and RSPs types.Is there any scaling document to get these values?
I want to learn about to 'Partially-programmed' errors at the output of command 'show l2vpn bridge-domain summary'. I can not find any related document about this part and how to troubleshoot if it is not equal to zero.
I am looking for...
Hi Friends, I have an ASR 1001(Cisco IOS XE Software, Version 03.16.01a.S/Cisco IOS Software Version 15.5(3)S1a).I checked it, but can't configure 'MPLS ldp', and no MPLS command under the interface. My question is which lowest release can ...
It is established that auto-upgrade should be disabled during an XR upgrade process. However, what is recommended for normal operations? I can see the advantage of having "auto-upgrade" in place so that any RMA or new LC's would/should be upgra...