With Ron Weaver
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about PowerVu Network Control System.
Cisco expert Ron Weaver covered the basic PNC operation, focusing on decoder management and service creation using a lab system. He went through the steps of authorizing and managing decoders, creating and scrambling services, and allowing decoders to access the service.
Ron Weaver is the tech lead for the DMN team in the Cisco Technical Assistance Center located in Lawrenceville, Georgia. Ron is responsible for supporting the DMN products for broadcasters, which include encoders, decoders, muxes, and control systems. He has worked for Cisco for 32 years, with 20 of those years working with digital video products and systems. Before joining the company, he spent four years in the air force, where he received his training in electronics.
Remember to use the rating system to let Ron know if you have received an adequate response.
Ron might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation in Service Providers, sub-community Video discussion forum shortly after the event. This event lasts through December 20, 2013. Visit this forum often to view responses to your questions and the questions of other community members.
Related Links
PowerVu Network Control System - Slides from live webcast
PowerVu Network Control System - Video from live webcast
PowerVu Network Control System - FAQ from live webcast