on 12-23-2015 11:28 AM
Ever wondered how to backup the running configuration in XR each time a commit is made? Many operators use offline scripts that do this periodically, that surely works well. Another simpler method is to have the system upload/backup its config each time the configuration is modified, this ensures the configuration is always up to date. Just add this command to the config:
This is an example with the server reachable inside a VRF(MGMT) on the router.
#configuration commit auto-save filename tftp://10.1.1.100;MGMT/XR_Nodes/asr9922_london.cfg
This is an example with the FTP server reachable in the default routing table. RCP can be used.
#configuration commit auto-save filename ftp://user:password@10.1.1.100/XR_Nodes/asr9922_london.cfg
More info in the command reference:
http://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/sysman/command/reference/b-sysman-cr53xcrs/configuration_management_commands_on.pdf
Eddie.
How to change file name to include date & time so that backup files are not overwritten.
Nishant,
The team just made a change in XR whereby we append the file with date/time stamps, so XR will take care of this.
RP/0/0/CPU0:T3(config)#
ios.0/0/CPU0:/disk0:ios.0/0/CPU0disk0: $ ls -lt
total 60
-rwx------ 1 zhaowan eng 399 Jul 3 17:34 CONF_BK_TS.20160703-173423
-rwx------ 1 zhaowan eng 399 Jul 3 17:34 CONF_BK_TS.20160703-173411
-rwx------ 1 zhaowan eng 399 Jul 3 17:34 CONF_BK_TS.20160703-173402
Thats Good .. Do we need software IOS/module update for same ??
Yes, this is going in 6.1.2 which is ~Oct.
That should support from 6.2.1, follow by CSCuu24747.
Have similar topic:
https://supportforums.cisco.com/discussion/12461536/configuration-commit-auto-save-filename
------------------
RP/0/RSP0/CPU0:ASR9001-A#dir disk0: | i user
Tue Jul 25 08:54:32.149 UTC
48743806 -rwx 506861 Tue Jul 25 08:54:21 2017 user.20170725-085410
RP/0/RSP0/CPU0:ASR9001-A#
RP/0/RSP0/CPU0:ASR9001-A#
RP/0/RSP0/CPU0:ASR9001-A#
RP/0/RSP0/CPU0:ASR9001-A#sh run | i auto-save
Tue Jul 25 08:56:16.256 UTC
Building configuration...
configuration commit auto-save filename disk0:/user
RP/0/RSP0/CPU0:ASR9001-A#
RP/0/RSP0/CPU0:ASR9001-A#show ins ac sum
Tue Jul 25 08:56:26.016 UTC
Default Profile:
SDRs:
Owner
Active Packages:
disk0:asr9k-mini-px-6.2.2
disk0:asr9k-mgbl-px-6.2.2
disk0:asr9k-k9sec-px-6.2.2
disk0:asr9k-mpls-px-6.2.2
Hi Chami
When i configured comand .
#configuration commit auto-save filename tftp://10.1.1.100;MGMT/XR_Nodes/asr9922_london.cfg
Every time when i commit command. System confirm:
This could be a few minutes if your config is large. Confirm? [y/n][confirm]
I think It's quite inconvenient.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: