cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Get the latest Cisco news in this December issue of the Cisco Small Business Monthly Newsletter

2561
Views
0
Helpful
2
Replies
Highlighted
Beginner

>> NSS-322, new drive #2 not available

NS322, latest firmware.

Original second drive was replaced due to 800+ bad sectors.

The drives were set as a Stripe RAID.

Replaced with a similar 'WD' one, but larger (3TB not 2TB).  AFter reinserting the new drive, it does

not show in the Smart Storage manager.

Any thoughts?  Anything special I should have done?

Thank you,

Robert

2 REPLIES 2
Rising star

>> NSS-322, new drive #2 not available

Beginner

>> NSS-322, new drive #2 not available

Well I was fianlly able to get back to checking the NSS322 on Friday...

The new harddrive I purchased is newer then the Approved List, so I replaced that with

the original drive #2 that had the bad blocks.

I check the NSS an hour after turning it on, the second drive (now back to the original)

still is not showing.  When I click on Drive #2 to see it properties, etc. (from the web

dashboard), I get kicked out of the web dashboard.

I reset the NSS back to factory settings, thinking it might reformat the drives, no go.

Drive #2 still not showing.

Any Ideas?

Thank you,

Robert