Acces Rules cisco rv325

[emilianoRural]

Hello, I want to enter a debian server that I have connected in my work, I want to enter via SSH, but I do not know how I have to activate the firewal so that it allows me to enter from the public IP to the IP of said server with port 22.

I hope you can help me. Thank you.

[balaji.bandi]

here is the reference guide to setup static NAT one to One

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4154-configure-one-to-one-network-address-translation-nat-on-rv32.html

[emilianoRural]

Hello, thanks for answering.
It is not what I am looking for, I am needing to enable that I can enter outside my company via SSH to a debian server.
Inside the company I enter via SSH to the server using the private IP that it has, but outside, using the Public IP I cannot.
It must be an access rule configuration or some ports.

[balaji.bandi]

if no other inside server available you like only 1 Server to access inside, you can do NAT 1to1

if you have more than one you can do PAT.

[emilianoRural]

Hello, thanks for answering.
It is not what I am looking for, I am needing to enable that I can enter outside my company via SSH to a debian server.
Inside the company I enter via SSH to the server using the private IP that it has, but outside, using the Public IP I cannot.
It must be an access rule configuration or some ports.

[balaji.bandi · Accepted solution]

have you read this post :

here is the reference guide to setup static NAT one to One

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4154-configure-one-to-one-network-address-translation-nat-on-rv32.html

you can also look PAT

https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb4152-configure-port-address-translation-pat-on-rv320-and-rv325-vp.html