02-12-2016 01:26 PM
Is there anyone could help configure the RV042 vpn with amazon vpc i tried a lot but it has end up in failure.
02-15-2016 09:11 PM
If its anything like the RV325, it should work. Its stock-standard IPSEC with SHA/DH2. Make sure you set the MTU appropriately. If you have a dynamic IP address you must use aggresive mode.
02-21-2016 02:35 PM
Hi, thanks for the reply now am able to establish VPN connection to the AWS VPC but still there is some IP issues that makes the RDP fails to initiate because the router wan IP is differs from the public IP, lets say
public IP : 71.xx.xx.243 (wanip.info)
Router WAN IP: 71.xx.xx.242
It seems the the wan IP is behind the public ip or private IP and my question is how can we config the router inorder to get the RDP connected and yet the RDP works fine (site to site) router connected but not to the VPC.
02-21-2016 04:56 PM
Port forward your RDP port to the router IP ?
02-23-2016 03:59 PM
Hi I did port forward to my router class c ip 192.x.x.1 but the RDP didnt get connected to the AWS VPC am still wonder what is the real issue that's preventing
02-24-2016 02:53 PM
I presume you can ping through the VPN between the server-client and vv.
Can you do a tracert from both client and server and post the results?
02-25-2016 09:37 AM
Hi, The cisco rv042 is behind the Netgear prosafe vpn firewall fvs336gv2 and it seems this firewall is preventing the router but i can ping the tunnel IP's of the VPC from the server and not the public subnet ip or the instance IP of the VPC i wonder even thought the RV042 is VPN connected to aws VPC is the firewall preventing the RDP not to??
02-25-2016 02:38 PM
So you have 2 firewalls and 2 NAT devices? Why ?
I suggest you remove one router altogether. It should simplify your setup tremendously.
02-25-2016 03:05 PM
The netgear is the exact gateway of the entire network and i try to port forward the router ip on it but its not that easy as it was in the RV042 any idea
02-25-2016 03:19 PM
Remove the RV042 and use the Netgear then? Get the Netgear to negotiate the VPN.
I have no experience with the Netgear- cant help you there....
05-02-2016 09:51 PM
Did you allow RDP port in the VPC security descriptors?
02-24-2016 11:12 AM
Is there any one to help me out of this issue i tried to highest level but couldnt initiate the RDP to the VPC
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide