Is there a way to assign a static IP to a quickVPN client? Would I do this by entering in the MAC of the quickVPN client into the DCHP mapping table on the RV220W router? Or would I need to use a VPN policy to assign an IP address to an incoming quickVPN client connection? I am trying to share a USB printer attached to the quickVPN client so that others connected on the LAN at the remote end can print to it.
I answered your question in your other post. For future viewers of this thread, the router does not assign an IP address to QuickVPN clients. The tunnel is one way, devices behind the router have no access to the QuickVPN PC or anything on it's network. The QuickVPN PC has full access to the network behind the router.
Thank you for your response. I posted a second question because I couldn't find my first one. I didn't realize there was a delay between my posting a question and it appearing in the community discussions.
QuestionDear All,I'm currently looking for firmware version 220.127.116.11 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 18.104.22.168 but can't find v...
Welcome back for issue number 2 of the small business support community newsletter. Over the coming months we're going to share exciting news on the hardware and support community side. For now, we'll highlight our new favorite docs, pertinent...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...