cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1120
Views
0
Helpful
2
Replies
skyscream
Beginner

Basic problem with PPTP on RV120W

                   I recently bought Cisco RV120W-E V01 and insall it in my home (with firmware 1.0.4.10). I want to establish PPTP conection from my notebook (when I am not at home) and to access (through VPN tunnel) to all hosts in my LAN (with no port restrictions). I configured VPN (PPTP) users and I can establish PPTP tunnel from client to RV120W. My traffic to Internet is going through VPN tunnel to RV120W and then out on Internet, and that is fine. What is not fine is that I can not access to any host on my LAN, and that is the main reason why I configured PPTP tunnel. It is not clear to me, when I am reading admin guide, what I have to configure to allow only my tunnel traffic to reach LAN hosts. Any idea how to do this? Thanks.

2 REPLIES 2
luisbubu90
Beginner

try SSL VPN

Tom Watts
Advisor

Hi Martha, on a computer you're trying to reach, try to disable the firewall.

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/