Routers - Small Business

My problem seems to be a strange one. I have the RV120W running with port 22 forwarded to one of my servers. When attempting to upload a file from within my network via SFTP the file transfer starts and then quickly fails with the following error mes...

I have Comcast cable setup at the main office (RV016) and also at a remote office (RV042 or RV082) both are their "business" class service. At the main office I have 22Mbs down and 5Mbs up, remote office is 16Mbs down and 2Mbs up. I have verified tha...

Hi,I need some help with RV042 router to allow broadcast to pass through.I have tried simple scenario. Router is in "Router" mode. Firewall is disabled. Multicast pass through is enabled.DHCP server in router is disabled. All IP addresses are configu...

When I walk the SNMP tree, I see the ports below but they don't seem to match the hardware.  This devices has 4 Ethernet LAN ports + 1 Ethernet WAN port + 1 RadioI have eth1, eth2, eth4, WAN, and the radio active and the SNMP walk shows eth0, eth1, e...

Hi AllI am looking at learning some of the cisco commands so the best place to start it to replace my existing kit. I currently run a zyxel p660 router which then forwards all request to a zyxel zywall. I would like to ethier replace the zywall or if...

I have a RV016 router in place that has numerous Gateway to Gateway VPNs connected to various sites over Comcast Cable. I would like to funnel all traffic through the RV016, but I am only seeing the tunnel traffic going between each.I think I saw som...

Is it possible to connect the iphone to a RVS4000 via vpn?   On previous models in the RV class it was possible to just use pptp but it seems to no longer be a option.  I really need to get this working.

Hi allI'm trying to setup a VPN connection to my local network, specifically to connect to a CCTV DVR which has an IP address of 192.168.150.50 on the network. The software supplied to view the cameras connects to 192.168.150.50:15000I have successfu...

Dear Support,IM policy for blocking MSN, it does not work for new Windows Live Essentials 2011, I think we need IPS update.With Skype, can you please review the IPS signature, IM Policy does not work on Skype. Is there any settings in WRVS4400N that ...

Hi,We've put in an RV120W for a client, and since they have had problems with emal attachements (notably PDFs) getting corrupted, ad RDP conenctions to their network being dropped.I found an article that suggested turning on the Content Filtering, wh...

Do I miss something or is it not possible to filter routing between Vlans on this device?After a day long trying, I'm facing the possibility that ACLs apply only between WAN and LAN, but not different Vlans.So there is either inter Vlan routing enabl...

Does anyone else poll this router with SNMP?We are using firmware version: 2.0.0.19-tz We are having problems with the traffic counters, some of them appear to be implemented as 16 bit counter instead of 32 bit counters. The reason this is causing pr...

If I ping my SRP527 from the internet it wont answer.  Any previous ADSL gateway/router I have used had an option to Enable/'Disable Remote Ping' but I can't find it on the SRP527.As this is a fairly unreliable router, which locks up every few weeks,...

I have a few questions regarding IPSEC, DynDNS, accessing the router externally, and using those features on the following models (all models are of the latest firmware):RV120W (WAN IP 12.20.20.20; LAN 10.20.20.1 255.255.252.0)RVS4000 (WAN IP 12.2.2....

I was setting up one of our Jr Engineers with a WRV200 (Dynamic IP) and attempted to  create a L2L VPN to a Sonicwall TZ210. Under no circumstances could I  get the tunnel to come up in Aggressive mode. I wound up having to sign  up with DynDNS and b...