Routers - Small Business

I created an IPSec site-to-site VPN tunnel between two locations on two Cisco 2911 routers. Site A is IP network 192.168.1.1/24 and site B is 192.168.2.0/24. Users at site B access a server 192.168.1.100 port 9000 and 9005, which exists in site A. Ev...

I upgraded my cisco RV320 to the latest release 1.4.2.19 but there was no web filtering feature then i saw this article  https://www.cisco.com/c/en/us/support/docs/smb/routers/cisco-rv-series-small-business-routers/smb5318-configure-web-filtering-on-...

Hi, I have a RV320 setup in dual WAN connected on WAN 1 to LTE4G router and on WAN 2 to another operator box. I would like to know if there is any possibility to do some port forwarding onto specific IP of my internal subnet from both WAN 1 and WAN 2...

Hello,each RV345 have 2 VPN License if you buy the Product. So if i want to connect 2 RV345 with a "Site to Site" VPN I need nothing more?LAN1 - RV345 - VPN Site to Site - RV345 - LAN2.For configuration i found the Document  but here stands Nothing a...

Hello, is it possible to set a DNS Helper so that i can use my central DNS Server? DNS-Server -> first RV345 -> WLAN -> second RV345 -> DNS Clients ThanksBruno

A client would like to migrate off PPTP to IPSec using an RV345 and the 3rd party VPN client option.  Does anyone know if there are any docs or instructions out there that describe how to enable this using the native Windows 10 L2TP/IPSec client?  I'...

Hi Guys, mi name is Pablo, and i have 2 Cisco RV345, in Firmware Version 1.0.01.20, and the same configuration in 2 routers (changgin only segment ip).I have a link point to point in port 16, for connect 2 branch offices.I crate a route static for vl...

Hello all, I have a remote RV130 set by a local remote ISP as "gateway" in the operating mode for "routing" under "networking" section.Simple configuration, Optic fiber, a WAN ip, a LAN ip, that's it.Everything works well except i can't connect my IP...

RV082: Static IP, no NAT, Firmware: v4.2.3.09   RV042: NAT   I've tried literally every setting on both sides. On the NAT side, I'm forwarding UDP 500, 1500, 50. Nothing will cause these two devices to connect. What else could possibly fix this?

Hi, I'd like to setup an OpenSLL connection for all internet traffic through to IPVanish using a private VPN, can anyone suggest how I go about setting up the router? Thanks and regards

Hello everyone, I placed a RV220W to a small site, Firmware 1.0.7.2, PPPoE, 2 Site-to-site VPNs, 2 VLANs, 6 wireless devices. However, this router going to drop the Internet connection in recent 2 weeks, 4 times per day in average. Try to google abou...

Hello All,   I got the RV340W for 2 weeks, and the 5 GHz wireless no longer broadcasting suddenly.   From the front panel LED, the 2.4 GHz WLAN is ON but 5 GHz WLAN is OFF. Both radios are ON in the Wireless Settings, and I checked the Radio Status f...

Hi, I have an RV130W router configured to establish a site to site connection.The tunnel perfectly establishes the connection, but every so often it reconnects and I do not know how to find out the reason.In the log I see the reconnection process but...

Hello!I have an RV340 (1.0.01.20) which does not apply the changes I make in Port Fordwarding. I need to create new rules but it does not work ... I make all the changes, but after I apply it, it returns the settings that were.I have already tested t...