Routers - Small Business

The ZTE MF821D LTE USB Modem is recommended for the rv320 router but it won't recognize it. I have had some success before with another modem by updating the firmware/drivers. I have been searching the Internet for firmware/drivers including the ZTE ...

I've found a few easily repeatable bugs for Cisco to address in the RV320's next firmware release: Bandwidth management: - creating rate control rules for WAN1 restricts the performance to excessively low levels; eg: setting upstream & downstream ru...

Hello, I am configuring a new RV320 router. I have a PC with a static IP address of 192.168.1.100, netmask 255.255.255.0, and gateway of 192.168.1.1, and a network cable connecting the PC to port 1 on the RV320. The RV320 does not have any other conn...

Hi, I'm creating a small network with a Cisco 2960 where I whant to create two separate vlan (let's say vlan 10 and Vlan 20)The idea is to keep the 2 vlan separated by connecting the one port on each vlan on the Cisco RV 320 (that I'm tinhknin to bu...

I am using a RV325 Small Business router and I am Currently having a hard time finding a VPN Client capable of L2TP config for MAC OSX,  I just recently managed to make PPTP config work on Shimo VPN Client, but due to the unsecured config of PPTP i c...

Hi, first time using these forums. We have a RV042G. We need to permit a company we do business with to port forward a port (5900) to one of our internal machines (192.168.1.122, for example), but we only want to permit the forwarding if the request ...

Hi. Can anyoane help me to connect five RV320 routers to a RV320 router on VPN? I managet to connect shrew vpn client to RV320 router but RV320 to RV320 I did not succeed. Thank you.

Hi all, My network setup: location A  (RV325) Connected to ISP and only 1 LAN (10.0.1.0/24) Location B (RV325) Connected to ISP and 2 VLAns  (A: 192.168.1.0/24)  and (B:10.0.2.0/24) Both sides connected by a gateway-to-gateway VPN (working as expec...

I am working with Site to Site Vpn connection. I have four site to site vpn tunnel on my cisco RV130W. Now my question is how to confirm that each traffic from my local lan will only use its vpn tunnel from 4 site to site ipsec vpn tunnel. how to con...

Hi. I'm a new in RV042 model,and i need somebody can help me regarding how to configure my Vpn Router. I need to configure my vpn router as gateway to gateway. I hope somebody can help me. If you guys will share to me the step by step procedure for c...

Ok I have a router problem. It's a Cisco Linksys router x2000. The line is DSL, the router is setup with static ip and it was working fine, until someone disconnected while cleaning up. So now once connected back up we can only get online through wif...

Trying to setup a simple network with an RV320 and a few Windows PCs.  The only inbound traffic required is IPSec VPN.  It's working except for couple issues. 1.  I added an access rule to deny all inbound traffic from WAN and to "log" packets so th...

Hi my name is John, i have vpn router RV042 model,and i don't know what is the problem why they not working. This is what happen, I can ping the ip address of the my router through cmd,but i can't access the ip address through webpage. 

Por favor necesito si me pueden ayudar con mi RV042G. Lo configuré aparentemente bien porque funcionó 3 dias normalmente y hoy simplemente no hay conexión a Internet. Al apagar el firewall funciona bien, pero no es la idea. En su reemplazo pongo un r...