Routers - Small Business

Hello, I can't access commands cli on RV325 v1.1.0.09 (2013-09-04, 12:11:26) I don't have Enable SSH or Enable Remote SSH on Firewall>General (http://www.cisco.com/c/dam/en/us/td/docs/routers/csbr/rv320/CLI_guide/rv32x_cli_guide.pdf) It doesn't wor...

I'm trying to replace a dead router from another vendor by using a new RV325 (firmware 1.2.1.14).  I thought this would be a simple drop-in swap but I'm struggling to configure it in a way that minimizes my installation work.  This is my first Cisco ...

We just recently purchased a RV130 router.  HOWEVER we cannot get it to work and the available documentation is absolutely of ZERO use. We have a broadband access made available by an ISP. Originally we had an Airport Extreme attached to the WAN. Eve...

Dear, I bought this router last week to use the VPN with QuickVPN.I connected to my office from my home and I can acess the address of Cisco, 192.168.25.1My network is under 192.168.15.x. But I can not acess the other computers and server at the netw...

Some time ago I posted a question about routing multicast traffic through VLANs. The conclusion we reached was that the traffic belonged to mDNS and was running in a 224.x.x.x group, meant to be LAN-only. It was suggested that some switches had "serv...

I have a very simple setup, 2 vLANS, with inter-vlan routing enabled and working perfectly (machines on either vlan can ping one another). I need to use a second external IP to send traffic to vLAN 2. The moment I enable the One to One NAT checkbox I...

Hi guys, we have a SRP521W linked to internet through a HUAWEI modem. We just lost its SIM PIN/PUK and wonder if such data can be retrieved from any log, backup file, etc. We need to use the modem attached directly to a computer, no way to do so unle...

Hello, Not sure if I am posting this in the correct section or not but I have a quick question that I believe a Cisco tech could answer quickly.  I have an RV325 device currently connected to a WG XTM 850 via IPSec.  The connection is working well bu...

We have configured the router to connect to the internet using PPPOE. when a user connects to the IPSec VPN from a computer using Windows 10 inbuilt VPN client the router reboots. The firmware is using the latest available. Any ideas on what to do...

Hi, I have two offices connected by cisco rv320 , latest firmware V. 1.3.1.12. using a VPN Tunnel. The internet connections at both offices are Fibernet 200Mbps down/20Mbps up Logging on the domain from the remote office takes too long, accessing th...

I'm using a RV220W and seeing some strange behavior with one of the one to one NAT configured hosts I have setup. I'm forwarding a public IPv4 address to 192.168.0.215 on my private network. From the public internet I can access the web application r...

Hi, I am trying without much success to establish an openvpn with a cisco RV325 router with the recent firmware. Is there a clear step-by-step walk-through on how to do it with a windows / iphone client ? here is an example log result:  Any help woul...

Hello I recently purchased a new RV320 router. I have a need to open the firewall to a specific trusted public IP address and have all incoming traffic from this public IP directed to a server on the LAN. I am using the Access Rules in the firewall m...

I having problem in cisco router rv016 with vpn connection issue after a firmware upgrade