Routers - Small Business

Hello,I want to buy a router that will do NAT for multiple subnets, such as in the following configuration from Cisco IOS:interface FastEthernet0/0 ip address 172.16.1.1/12 ip nat insideinterface FastEthernet0/1 ip address a.b.c.d/29 ip nat outsideip...

How do you add custom protocols that are not available on the RV130?The only available protocols are TCP, UDP, TCP & UDP, ICMP For Exmaple the RV180 allows you to do this, why not the RV130? it is its replacement right? 

Fellow Cisco Experts, I have pretty much googled my brains out trying to figure out why we can't access our Vitek DVR on our iPhones.  It seems as if the TCP ports for 554 and 8081 work, but UDP ports do not. The public IP is 70.175.15.103 and the pr...

Hello everyone,I´m having some issues with my Cisco SR520. The router works just fine but 3 or 4 times at month we have to reload it cause the connectivity drops and it won´t get back until we restart the unit. We don´t have any complex configuration...

How to setup a vpn on a RV-180 router

Why is it that all of the RV Series Routers appear to not offer the ability for multiple IPv6 Interfaces?I have looked through all of the Online Device Emulators for the RV routers and cant see how one can do what the ISA500 does for IPv6 As I would ...

Got a 50 mbit connection and IPS throttles my connection by a lot.I've tried to disable IPS, it works well for the computer that uses a network cable, I can access internet and the router and I get the full speed. But all my wireless devices are unab...

Hi, I have had the CISCO RV180W Small Business Router for a few years now and it had been running OK up until now. The router appears to be dropping wireless connections at random intervals throughout the day/night. These random drops prevent devices...

The emulator for the RV320 and RV325 do not allow me to see the IPv6 Setup pageI tried reading the manual, but it is a bit lacking in detail and definition for me to fully see what is and isnt possiblehttps://www.cisco.com/assets/sol/sb/RV325_Emulato...

I am having problem with the basic setup of RV325 router.Example:STEP 1 Connect a PC to a numbered LAN port on the device. If the PC is configured to become a DHCP client, an IP address in the 192.168.1.x range is assigned to the PC.  Which LAN port ...

Hi,I am considering to buy two RV180Ws and place them on two separate locations. But before buying I would like to make sure that the units meets my requirements. Lets call the locations A and B. I would like to connect location A with full network a...

Can anyone tell me how to authorize show run command to privilege level less than 15?I have tried to authorize the show run command to privilege level 3 but it is not showing the complete configuration. It is just showing the configuration size and w...