Routers - Small Business

That is it in a nutshell.  I can press RESET but I will lose all the settings in the router.  Without the password, I cannot get in to even view what they were/are.  I need to modify one setting or I would not worry about it since it is working fine ...

I'm trying so subdivide my home network into VLANs to split Jumbo Frame capable devices from the rest.Using the preinstalled 1.3.0.5 version I could configure this correctly. After upgrading to v1.3.2.0 the DHCP server on any VLAN (except 1) no longe...

Our main office uses an RV042 router and our plan was to allow remote staff access to our office network via Quick VPN.We have about 5 people that work remotely, including myself, and we have all been having intermittant trouble connecting with Quick...

I purchased 2 wrv210 routers, had a VPN tunnel set up and working OK.Had DDNS working OK, VPN tunnel working OK, no problem.I had some problems, and needed to exchange the locations of the routers. So I proceeded to change settings.When I changed the...

I have been using an RVL200 with 1.1.12.1 firmware under Windows 2000 IE6 for several month now.No problems...  I recently just crashed and now I can not get a tunnel to come up.  I can connectjust fine, but when I click to get the tunnel built, noth...

Having issues with security appliance:  Trying to setup a port forwarding. I am in the Firewall tab and setup services for TCP and UDP port 7195. I then went to IPv4 rules and setup a rule that from Zone insecure(dedicated WAN) to Zone: Secure (LAN) ...

I'm trying to set up a remote IP phone using an existing Linksys RV042 router. Some of the features of the phone work, but some do not. I have forwarded several ports to the phone system. But when I go to an online port scanner, it tells me that some...

I have not worked with the lower end routers, so I am working on a hunch.  I have a dlink wireless router handing out addresses through dhcp for public access.  I also have my private network on a switch with a server handing out addresses.  I would ...

Hi,Presently we have a wireless router connected to our RVS4000 so that guests can wirelessly use the internet.  We only use the wireless for guest access, not for company users or resources. How can we configure the RVS4000 so that anyone accessing ...

HiWe're running RVS4000 routers on 50Mbps cable connections. With IPS switched on, the maximum WAN > LAN throughput is 20Mbps.The solution to this issue is to disable IPS - full 50Mbps throughput then returns.However, that presents a new problem. Wit...

Hello,Does anyone know if you can manually set the Duplex for the WAN port on a RVS4000? I know it is possible with the RV042 but I'd rather use a RVS4000 since it has Gig Lan ports.

Switching from RV082 router to SA520 K9 router. In the RV082 router under the setup tab, and then forwarding. I have a udp and tcp service running on port 7195, to our server address 192.168.xx.x. I can not find where I would be able to do the same t...

Hello to anyone who can help,I'm trying desperately to get my RV120W to establish a VPN connection.  The goal is to let clients access via VPN client - do not need to do anything site to site.Due to constraints at the site, our only option is to plac...

So I just received by Cisco RV042 and I'm LOVING it so far. Only one minor problem, sometimes I'm not able to use some services (maybe b/c it bounces connections between the 2 public WAN (DSL + Cable), one example is SSH can drop after being connecte...