Routers - Small Business

Hi,I am trying to monitor a Cisco RV325 through SNMP. I have problems querying the interfaces. SNMP queries return the following interface list:iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2iso.3.6.1.2.1.2.2.1.1.3 = INTEGER:...

Hi, does DMZ on RV345 also redirect IPSEC server to the DMZ client ? I want to have VPN concentrator on DMZ client not on the router, and can i choose which WAN goes to the DMZ client ? Thank you

Problem Description On September 30 2020, Cisco Automated Software Distribution (ASD) service will decommission legacy API versions that are used by selected older products in the Cisco Small Business portfolio. As a result, these products will no lo...

Unable to access RV042 after firmware upgrade  After upgrading the firmware of my RV042 router to latest version RV0XX_v4.2.3.14_20200528-code.bin from version 2.2 it's not working. After the upgrade I was not able to access the router using the web ...

So I just got my RV340 and I have two issue maybe you guys can help out with. 1. I am using UniFi Apps and I am trying to use DHCP option 43, but for some reason the router will not allow IP address and prefers hex NP, but when I enter the HEX value ...

 We are having Cisco 2951 Router. I am getting the message System Bootstrap, Version 15.0(1r)M16, RELEASE SOFTWARE (fc1)Technical Support: http://www.cisco.com/techsupportCopyright (c) 2012 by cisco Systems, Inc.ERROR: DDR controller 1 data training ...

I have a new RV345P that is intended as an internal network routing and "isolation" device. It will never be directly connected to the Internet. My main interest in this device is strictly as a basic router, DHCP server for one or more internal downs...

I have been trying to register a device for a couple days and keep getting "communication timeout" error.  I thought maybe servers were down but since it's been almost 24 hrs maybe it's something else?  My Smart account is active but does not have an...

Hi all, I can't seem to find a way to allow my GPO to pass through my core router(which has ACL running). I was able to determine that the cause of this was the packets were being blocked by the ACL because if I remove the ACL on the VLAN, the GPO ta...

Cisco RV345p how many port forwarding maximum

Hi,Is there a time frame for implementing support for including Option 61 on WAN interface DHCP configurations. A number of UK ISP require this option to connect routers to FTTP (150 mbps connections and above)

Using USB730LConnects for a few seconds then drops.   Tried on USB1 and USB2.     Get a small amount of data then disconnects.   Latest firmware.USZB730L works correctly with reliable connection when connected directly to a laptop.  Signal level is O...