Can someone point me to a simple setup guide to configure an L2TP/IPsec on the Cisco RV180?
The network setup is as follows:
One Cisco RV180 at site one plugs into a gigabit fiber modem on its wan port. This network operates on 192.168.0.x.
The other Cisco RV180 at site two also plugs into a gigabit fiber modem on it's wan port. This network operates on 192.168.1.x.
The goal is to allow employees to login remotely and also to create a VPN between the two sites so that they appear to all be on the same LAN for regular day to day users.
It is currently working fine exactly like this except the totally insecure PPTP protocol is being used. I want to upgrade this as soon as possible but I'm not really sure where to start or what steps to follow.
QuestionDear All,I'm currently looking for firmware version 126.96.36.199 for Linksys SPA400 Analog Telephony Gateway. Unfortunately, my device was bricked and I was able to recover it using a recovery tool and recovery firmware version 188.8.131.52 but can't find v...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Welcome and thanks for visiting the Small Business Community Newsletter. This is our first of what we will make a monthly newsletter where you will be provided information on New products and trends, What’s ...